The song was composed by singer Shaan with lyrics provided by Swanand Kirkire, and vocals shared by Shaan, Kanika Kapoor, Armaan Malik, Shankar Mahadevan, Shreya Ghoshal, Ayushmaan Khurana, and Sonu Nigam among others, and choreographed by Shiamak Davar, who makes a guest appearance. He continues to pursue his hobby and earns an income out of it. Similarly, a Mumbai-based NGO, Bhamla Foundation, through its environment initiatives, also worked towards curbing the plastic menace, keeping in line with the UNO initiative of “Beat Plastic Pollution”.One of them was certainly “The Concert For Bangladesh”, the name provided to two benefit concerts, organised by former Beatle George Harrison along with sitar maestro Ravi Shankar at New York City&hybrid injection molding machine Factory39;s Madison Square Garden on August 1, 1971.While “The Concert For Bangladesh” is no doubt recognised as a highly influential humanitarian aid project, the next notable event that I can immediately reminisce is “Live Aid”, a dual-venue benefit concert held simultaneously in London and in Philadelphia on July 13, 1985, which was organised by musician Bob Geldof to raise funds for those suffering from famine in Ethiopia.9 billion, across 150 nations, including India.Meanwhile, “Live Aid” was one of the largest-scale satellite link-ups and television broadcasts of all time with an estimated global audience of 1. For the trivia-minded, I received an opportunity of seeing Geldof perform live in Mumbai with his band, Boomtown Rats, in February 1982.

The launch event was hosted by RJ Archana, with participation from UN environment chief Erik Solhiem, along with actors Diya Mirza and Pooja Bhatt.More currently and closer home, music is being effectively utilised to support the World Environment Day (WED) on the 5th of June every year, and it is the United Nations principal vehicle for encouraging awareness and action for the protection of our environment.Geldof provided a sequel 20 years later, “Live8”, with 10 simultaneous concerts held on July 2, 2005 as a “Global Call For Action Against Poverty” initiative, which became reason enough for then three-member Pink Floyd to reunite with former bassist/lyricist Roger Waters for the first time in more than 24 years; in turn, also becoming the final time for the four members to perform together. All this arrives as a reminder of the initiative taken by the Maharashtra government in providing a notification on March 23 this year, banning various forms of plastic. Of course, what is a "social cause" is debatable but, growing up through the years, I remember various music-related events that had the media and entertainment industry sit back, and reflect on the best manner in which they could lend their support. First held in 1974, it has been a flagship campaign for raising awareness on emerging environmental issues.

The programme, launched by former President Pranab Mukherjee, subsequently followed with the release of the official “BeatPlasticPollution” song, “Tik Tik”, ideated by the Foundation's Asif Bhamla with Neeraj Roy (of Hungama).The writer has been part of media and entertainment business for over 23 years. Every year, the UN chooses one country to be a global host to spread environmental awareness and, this year, the privilege fell on India. An awareness generating video featuring RJ Archana was unveiled then to create awareness on various measures to be taken to combat plastic pollution.While “The Concert For Bangladesh” is no doubt recognised as a highly influential humanitarian aidproject, the next notable event that I can immediatelyreminisce is “Live Aid”, a dual-venue benefit concert held simultaneously in London and in Philadelphia on July 13, 1985, organised by musician Bob Geldof to raise funds for those suffering from famine in # Ethiopia.While the government decided to lift the plastic ban on small PET and PETE bottles with a capacity of less than half litre, it made installation of vending and crushing machines mandatory at starred hotels, malls, tourist places, and public places across the State

It is a major surgery and requires several weeks of recovery.It, however, is a procedure one should avoid unless absolutely necessary. “Limb lengthening surgery is done after an accident or due to infection, cancer or by birth, when one limb ends up shorter than other. If the risk is more than the benefit then it is better to avoid it,” explains Dr N.Leg-lengthening procedures were originally used to treat limb defects or injuries, but recently a growing trend has emerged and patients, especially youngsters, request doctors for the sole purpose of getting taller. consultant orthopaedic surgeon, Care Hospitals. And with youngsters having enough money these days, they don’t mind splurging on the procedure. People at large are subconsciously influenced by celebrities or anything that brings them closer to them. Later they regret it and undergo treatments, procedures and surgeries that not only lower their prospects of better health but also have a devastating effect on their psyche. The short limb is lengthened by few inches, using this technique. Otherwise dealing with complications will be difficult and will lead to unacceptable outcomes.

Jithendran, consultant aesthetic, plastic and reconstructive surgeon, Global Hospitals. Jithendran. The new kid on the plastic surgery block is limb lengthening. It could help with the marriage and career prospects, but it’s just an aspect of an unrevealed psyche that somewhere yearns for a better aesthetic appearance. The same surgery done by two different surgeons will lead to two different outcomes,” adds Dr N. Most places where you undergo procedures are not competent in dealing with any complications that may arise. The risk-benefit ratio has to be assessed before undergoing any procedure. More importantly, it should be acknowledged that height, unlike weight, has significant genetic impact and one should learn to be happy with what they have.Botox, facelifts and implants are passé. The same surgery is rarely performed on both limbs to increase the height,” says Dr Priti Shukla, consultant plastic and cosmetic surgeon, Ambrosia Clinic.Concentrate on health than enhancing featuresThe Indian Orthopaedic Association (IOA) has advised people not to do the surgery unless for rare cases.

So, the cosmetic surgeon should also have a good reconstructive surgery background. “One should understand China double color injection molding machine that these procedures range from simple to complex and have two sides of the coin — benefit and risk. Choosing the right surgeon is importantAn aspiring actor spent lakhs for having his legs surgically lengthened.“Another thing is to make sure that all cosmetic procedures are done by a trained plastic surgeon. People must understand that doing the bare minimum for good health, like exercising, a good diet and sound sleep are more than enough and should do the needful in bringing out a good personality,” says Dr Praveen Mereddy, Sr. Although Ilizarov (limb lengthening) surgery is an effective way of lengthening the bones up to four to six inches, doctors advise not to go for this extremely slow and painful procedure just for cosmetic purposes. In the formative years, people don’t take adequate proteins or practice other factors that contribute towards a desirable height.“What eventually matters is our overall health and not an enhanced feature. It is always best to verify the credentials of the surgeon before putting yourself under his knife

"These biodegradable materials, natural materials, they are very flexible so they can be used for robotic skins. So like  this, in all these existing materials we are giving new properties that these materials don't have so we can open up their application range," explained Athanassia Athanassiou, who leads the Smart Materials Group at the Italian Institute of Technology (IIT) in Genoa.In particular, robotics could be an important application for their research, according to Athanassiou. Athanassiou's team have developed a way to create bioplastic from food waste, and so hope to mitigate the additional energy required by using resources that would normally go to waste.Robots are getting ever more life-like, but underneath their synthetic skin it's a different story. So what we are doing apart from making these new composite materials - smart materials - we're also using them to change the properties of other materials, other existing materials like paper or cotton or different foams; from synthetic foams like polyurethane or forms of cotton.The researchers say their 'smart materials' could eventually replace conventional plastic which is made from petroleum, a fossil fuel, and contributes to climate change.

And also, in this flexible skin - robotic skin let's say - we can incorporate sensors so they have this tactile sensing that the robots need, but with biodegradable materials," Athanassiou told Reuters."The main issue is it's actually difficult to see how you can achieve the properties that you want to have; say matching more the properties of the human body. Bioplastics are made from plant material, but are more energy-intensive to produce. But they can be also very hard so they can be used for internal parts of a robot.While Athanassiou believes biodegradable materials are imminent for the skin-like outer layer, she believes eventually the entire robot body could decompose just as if it was flesh and blood. Their insides are still made mostly from metal and plastic - materials that are hard to dispose of.Nikos Tsagarakis, lead researcher on a humanoid robot project at the IIT, said that roboticists will have to move on from metal in order to build the next generation of robot.Their insides are still made mostly from metal and plastic - materials that are hard to dispose of. And if robots are to ever be truly ubiquitous, they also need to be easily disposed of once they reach the end of their useful life-span.."We are infusing any material with nano technology.Robots made from biodegradable material would certainly make them more human-like, and perhaps more easily accepted in the real-world.

By merging separate distinct materials at the nano level the scientists are creating new and novel materials that preserve the properties of the individual components, but exhibit characteristics that would not be possible individually. But, in a few year's time, I find it very feasible that all the robot can be biodegradable," she said. So going to alternative materials would be this advantage - it will help us to make lighter robots, more efficient and, finally, also recyclable," said Tsagarakis, who is developing the Walk-Man humanoid robot to operate human tools and interact with its environment in the same way a person would."I believe that the starting point would be to make part of the robot, like the outer part of the robot for example, with this biodegradable material. But researchers in Italy are developing 'smart materials' that could allow robots to be built from substances that will biodegrade when they've reached the end of their life-span

Washington: Take, for instance, black plastic sheeting sold as mulch. The effect in both cases is to create a “perched” water table inside the pot, giving the roots less depth of well-aerated soil. These are woven or spun plastic fabrics that resist tearing and have many small holes to allow passage of air and water.Geotextiles?Geotextiles, introduced more recently, are offered as an alternative to solid black plastic sheeting. Deliberately putting plastic in the ground is disrespectful of the skin — that is, soil — that covers our planet and sustains much of the life here. And the plastic eventually starts to tear and break apart, which creates a general mess.But problems arise again. And anyway, geotextiles need a thin cover of something to shade out the minimal light that makes its way through the tiny holes. If you don’t like the way these synthetic mulches look — surely the case when they are used in landscaping — you cover them.Deliberately embedding a permanent, synthetic blanket in PVC injection molding machine the ground or mixing plastic peanuts into the soil brings no benefits that could not be had in a more nature-friendly way.Removing plastic put on or in the soil becomes difficult or well-nigh impossible. An impermeable sheet of plastic over the ground can leave plant roots and soil microorganisms gasping for air. Roots set in the openings might develop even greater breathing problems when all the water falling on the plastic floods those holes.

While they would undoubtedly make a soil lighter, and thus seemingly better aerated, all that extra air is pretty much locked up in the peanuts. Try to make over the landscape in the future and you will be wrestling with and cutting geotextiles or collecting scraps of black plastic.. Over time, plenty of weeds eventually sneak in to grow in the wood chips covering the plastic. Wood chips look natural and are widely used for this purpose. Over time, the chips or other coverings also slide around to expose the plastic or geotextile beneath — not a pretty sight!Furthermore, even if black plastic or geotextiles don’t do their jobs forever, they’ll be in the soil that long, or almost. Paper mulch, for instance, biodegrades and can stave off weeds for a season.It has also been suggested that a layer of plastic peanuts be put in the bottoms of flowerpots to enhance drainage, as layers of gravel have been used.Also, spent potting soil can be spread on the ground or added to a compost pile, but do you want the peanuts there also?Environmentally friendly alternativesEnough plastic makes its way into our soils inadvertently, from misplaced plant tags to those stickers now ubiquitous on fruit skins to pieces of old plastic pots. In this case, that layer of peanuts is worse than useless, just as the traditional layer of gravel was.

Plastic peanuts, noAnother, fortunately, less frequently suggested use of plastic in the soil is plastic “peanuts.Both black plastic and geotextiles are widely used by farmers, gardeners and landscapers. Lay it on the ground, cut holes only where you will set plants, and weeds will die from lack of light, presumably ending all your weed problems for years to come. Perlite or vermiculite are two minerals that can lighten a soil more effectively than styrofoam peanuts. This stuff appears at first to be a cure-all for weed problems.” Mixed into the soil, the reasoning goes, they should increase aeration.But other problems arise